Pedal Replacement - Matrix U7xe-04 Service Manual

CHAPTeR 9: PART RePlACeMeNT gUIDe

9.10 PeDAl RePlACeMeNT

1) Use a 15 mm wrench commercial pedal wrench (available from Matrix - part # ZMS4001254) to remove the pedal from the crank (Figure A).
note: For the right side pedal, the threads are normal. For the left side pedal, the threads are reversed (the pedal turns off counterclockwise).
fIgURe A
2) Remove the pedal (Figure B).
fIgURe B
3) Reverse Steps 1-2 to install a new pedal. note: Be sure to tighten the pedal onto the crank using a commercial pedal wrench. The pedal
should be torqued as much as possible using the pedal wrench.
53