MAINTENANCE WORK ON CHASSIS AND ENGINE
Changing headlight bulb
Note
Damage to reflector Keep the glass of the bulb free of grease.
After fitting the bulb in the holder, clean the glass with a clean cloth. Any grease on the glass will evaporate by the heat and be de-
posited on the reflector.
Position the headlight mask. Mount and tighten screws
Specification
Screw, headlight mask
Check lighting function.
100155-11
Switch off all power-consuming components and switch off the engine.
Remove the headlight mask with the headlight. (
.
M6
5 Nm (3.7 lbf ft)
P. 99)
101