Flashing Code - KTM Supermoto 690 Owner's Manual

FLASHING CODE

Fault
02
06
08
09
12
13
14
15
17
24
25
26
Description
FI warning lamp (MIL) flashes
briefly 2x
FI warning lamp (MIL) flashes
briefly 6x
FI warning lamp (MIL) flashes
briefly 8x
FI warning lamp (MIL) flashes
briefly 9x
FI warning lamp (MIL) flashes 1x
long, 2x short
FI warning lamp (MIL) flashes 1x
long, 3x short
FI warning lamp (MIL) flashes 1x
long, 4x short
FI warning lamp (MIL) flashes 1x
long, 5x short
FI warning lamp (MIL) flashes 1x
long, 7x short
FI warning lamp (MIL) flashes 2x
long, 4x short
FI warning lamp (MIL) flashes 2x
long, 5x short
FI warning lamp (MIL) flashes 2x
long, 6x short
Possible cause
Malfunction in ignition pulse
generator circuit
Input signal from throttle valve
sensor too low/high
Input signal from throttle grip
sensor too low/high
Input signal from pressure sen-
sor of induction manifold too
low/high
Input signal from coolant tem-
perature sensor too low/high
Input signal from intake air
temperature sensor too low/high
Input signal from ambient air
pressure sensor too low/high
Input signal from roll angle sen-
sor too low/high
Malfunction in lambda probe
circuit
Malfunction in voltage supply
circuit of EFI control unit
Malfunction in side stand
switch circuit
Malfunction in Hall sensor
throttle valve control circuit
Measure
x
Check the ignition pulse
generator.
x
Check the throttle valve sen-
sor.
x
Check the throttle grip sen-
sor.
Check the pressure sen-
x
sor of the induction mani-
fold.
x
Check the temperature sen-
sor coolant.
x
Check the intake air temper-
ature sensor.
x
Check the ambient air pres-
sure sensor.
x
Check the roll angle sen-
sor.
Check the lambda probe.
x
Check the EFI control unit
voltage supply.
x
Check the side stand
switch.
x
Check the Hall sensor throt-
tle valve control.
129
x