Table of Contents
Advertisement
MAINTENANCE WORK ON CHASSIS AND ENGINE
x
Mounting oil filter
x
Cleaning oil screens
Warning
Danger of scalding Engine oil and gear oil get very hot when the motocycle is driven.
Wear suitable protective clothing and gloves. If you scald yourself, hold the affected area under cold water immediately.
Remove screws
Pull the oil filter insert
Circlip pliers reverse (51012011000)
Completely drain the engine oil.
Thoroughly clean parts and sealing area.
700104-01
Check parts for damage and wear. Replace damaged or worn parts.
Insert oil filter
Oil the O-rings of the oil filter cover. Refit the oil filter cover
Mount and tighten screws.
Specification
Screw, oil filter cover
700105-01
. Remove oil filter cover
with O-ring.
out of the oil filter casing.
and
.
M5
121
and
.
6 Nm (4.4 lbf ft)
Hide quick links:
Advertisement
Table of Contents
