MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting the handlebar angle
Checking engine oil level
Info
The engine oil level must be checked when the engine is at operating temperature.
x
Loosen screw
Move the handlebar to the desired position and slightly tichten the screws.
Move the handlebar carefully in both directions as far as it will go.
»
If the handlebar instruments touch the fuel tank:
Correct the handlebar angle.
100196-10
Fully tighten screw
Specification
Screw, handlebar clamp
Stand the motorcycle upright on a horizontal surface.
.
Info
The distance between the handlebar support and the handlebar clamp
must be the same at the front and rear.
.
M8
20 Nm (14.8 lbf ft)
117