MAINTENANCE WORK ON CHASSIS AND ENGINE
Adjusting the headlight range
A
On a light-colored wall with a horizontal area in front of it, make a mark as high as the
center of the low beam headlight.
Make another mark at a distance of
Specification
Distance
B
Stand the motorcycle at a distance of
beam.
Specification
100159-10
Distance
Use a screwdriver (see illustration) to adjust the headlight range.
Specification
The boundary between light and dark must be exactly on the lower mark for a motor-
cycle with driver.
Info
Turn clockwise to increase the light range, turn counterclockwise to reduce the
light range.
If you have a payload, you may have to correct the headlight range.
100158-10
under the first mark.
5 cm (2 in)
in front of the wall and switch on the low
5 m (16 ft)
105