Canon A-200 series Service Manual page 8

®
AC Power Outlet
To plug a power cord of a peripherals unit etc. into this outlet. This outlet is controlled by the
power switch
CD.
When the power switch is turned on, this outlet is powered, and when the pow ­
er switch is off, this outlet is not powered.
This outlet can handle AC current in maximum of
OAA.
Be careful not to exceed this figure when
using this outlet.
®
RS-232C Connector
To plug a special cable to this connector when an user needs to communicate with a host com ­
puter. another personal computer or serial printer.
@
Printer Connector
To print out data, information or programs, connect a printer cable to this connector.
(jJ)
Expansion
1/0
Slots
The Canon A-200 can expand its functions by plugging in optional expansion cards into these
expansion slots.
@
Composite Signal Jack
This RCA-type jack has been provided for the color display adapter board only. Connect it to .
a composite signal input terminal on a display monitor.
@
Display Connector
To connect 9-pin plug with cord suitable for this connector to make a connection with the com ­
puter and the display monitor unit.
Figure 1-2
(f3l
Pocket
This pocket is provided for the Model M1 and Model C1. Keep unused disks in it.
Figure 1-3
5