Canon A-200 series Service Manual page 7

1-3. Description of the Computer
CD
Power Switch
To turn the computer on or off. On-position is marked as ''1'' and off-position as "0': When turning
on the system, turn the power of the peripherals on first then turn the computer's power switch on.
®
Floppy Disk Drive(s)
To save or load programs, files or data. There are different two versions in the number of disk
drives: A-200 Model M1 and C1 have only one drive and Model M2 and Model C2 have two drives.
@
RESET Button
To reset and initialize the computer when it has "hang-up" caused by improper user's program
or some machine-language programs. Whenever this button is pressed, the computer will begin
to execute the self diagnostic tests and then re-Ioads the DOS or other system disk to initialize
the system.
@
Keyboard Connection Jack
To connect a coiled cable with a plug from the keyboard unit into this jack.
@
Keyboard
To utilize when entering commands etc.
Figure 1-1
®
Cooling Fan
To prevent the computer against excessive heat generated during operation. Do not block this
ventilation when the computer is installed close to the wall etc.
W
AC Power Inlet
To insert AC power cord with jack into this inlet.
4