Installing The Rear Hard Disk Drive Cage Assembly - IBM x3455 - System - 7984 User Manual

Installing the rear hard disk drive cage assembly

Reinstall the rear hard disk drive cage in the server if you have performed one of
the following actions:
v You have installed a hard disk drive in this drive cage
v You have removed a drive from this drive cage, but do not plan to install a
To install the rear hard disk drive cage assembly, complete the following steps.
Rear hard disk
drive cage
Retention latch
1. Insert the drive-cage assembly into the server; then, slide the drive-cage
2. Close the drive-cage assembly retention latch.
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 51.
32
System x3455 Types 7984 and 7986: User's Guide
replacement drive
assembly toward the rear of the server until it seats securely.