Installation; Unpacking And Inspection; Preparation; Mounting The Unit - MPP Solar PIP-HS User Manual

INSTALLATION

Unpacking and Inspection

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should
have received the following items inside of package:
 The unit x 1
 User manual x 1
 Communication cable x 1
 Software CD x 1

Preparation

Before connecting all wirings, please take off bottom cover by removing two screws as shown below.

Mounting the Unit

Consider the following points before selecting where to install:
Do not mount the inverter on flammable construction

materials.
Mount on a solid surface

Install this inverter at eye level in order to allow the LCD

display to be read at all times.
For proper air circulation to dissipate heat, allow a clearance

of approx. 20 cm to the side and approx. 50 cm above and
below the unit.
The ambient temperature should be between 0°C and 55°C

to ensure optimal operation.
The recommended installation position is to be adhered to

the wall vertically.
Be sure to keep other objects and surfaces as shown in the

diagram to guarantee sufficient heat dissipation and to
have enough space for removing wires.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.
4