Installation; Unpacking And Inspection; Preparation; Mounting The Unit - MPP Solar PIP8048MAX User Manual

INSTALLATION

Unpacking and Inspection

Before installation, please inspect the unit. Be sure that nothing inside the package is damaged. You should
have received the following items inside of package:
Inverter unit Manual
DC Fuse Cable gland x 4 pcs

Preparation

Before connecting all wirings, please take off bottom cover by removing five screws. When removing the
bottom cover, be carefully to remove three cables as shown below.

Mounting the Unit

Consider the following points before selecting where to install:
Do not mount the inverter on flammable construction materials.

Mount on a solid surface

Install this inverter at eye level in order to allow the LCD display to be

read at all times.
The ambient temperature should be between 0°C and 55°C to ensure

optimal operation.
The recommended installation position is to be adhered to the wall

vertically.
Be sure to keep other objects and surfaces as shown in the right diagram

to guarantee sufficient heat dissipation and to have enough space for
removing wires.
SUITABLE FOR MOUNTING ON CONCRETE OR OTHER NON-COMBUSTIBLE SURFACE ONLY.
software CD RS-232 cable
PV connectors x 2 sets
Parallel communication cable
4
Current sharing cable