MPP Solar PIP-HS User Manual page 18

03 AC input voltage range
Power saving mode
04
enable/disable
05 Battery type
Auto restart when overload
06
occurs
Auto restart when over
07
temperature occurs
09 Output frequency
50A (default)
60A (Only for 4K/5K models)
80A (Only for 4K/5K models)
100A (Only for 4K/5K models)
Appliances (default)
UPS
Saving mode disable (default)
Saving mode enable
AGM (default)
User-Defined
Restart disable
(default)
Restart disable
(default)
50Hz (default)
16
70A (Only for 4K/5K models)
90A (Only for 4K/5K models)
110A (Only for 4K/5K models)
If selected, acceptable AC input
voltage range will be within
90-280VAC.
If selected, acceptable AC input
voltage range will be within
170-280VAC.
If disabled, no matter connected
load is low or high, the on/off
status of inverter output will not be
effected.
If enabled, the output of inverter
will be off when connected load is
pretty low or not detected.
Flooded
If "User-Defined" is selected,
battery charge voltage and low DC
cut-off voltage can be set up in
program 26, 27 and 29.
Restart enable
Restart enable
60Hz