Table of Contents
Advertisement
Hardware Specifications
Preventing Equipment Damage
Observe the precautions listed in this section to prevent accidental damage to the XP
components.
: To prevent accidental product damage, observe the following precautions:
Cautions
•
Always use proper electrostatic discharge (ESD) gear when handling the control
module, backplane, line cards or other internal parts of the chassis.
•
Make sure you allow adequate room for air flow around the chassis.
•
If you plan to install the chassis in an equipment rack, it is recommended that you
install a support tray under the chassis, especially for chassis that are completely filled
(no empty control module, power supply, or line card slots).
Hardware Specifications
The following table lists the physical and environmental specifications for the XP-8000
and XP-8600.
Dimensions
Weight
Power
Operating
temperature
48
XP-8000
Inches: 8.27" x 17.25" x 12.25"
Centimeters: 22.23cm x 43.82cm
x 31.12cm
Pounds: 24
Kilograms: 10.8
100-125 VAC, 5A maximum;
200-240 VAC, 3A maximum
o
Fahrenheit: 41
F to 104
o
o
Centigrade: 5
C to 40
XP-8600
Inches: 8.27" x 17.25" x 19.25"
Centimeters: 22.23cm x 43.82cm
x 48.9 cm
Pounds: 47
Kilograms: 21.2
100-125 VAC, 10A maximum;
200-240 VAC, 6A maximum
o
F
Fahrenheit: 41
C
Centigrade: 5
Enterasys Xpedition 8000/8600 Getting Started Guide
o
o
F to 104
F
o
o
C to 40
C
Advertisement
Table of Contents
