Table of Contents
Advertisement
Figure 3
shows the front panel of the control module.
Boot Flash
The control module has a boot flash containing the XP's boot software and configuration
files. The system software image file resides on a PC card or a TFTP server.
Memory Module
The control module uses memory to hold the routing tables and other tables. The
minimum factory configuration for the control module includes 64MB of memory (in a
64MB DIMM). You can obtain XP memory upgrade kits from Enterasys Networks to
increase memory to 128MB (in a 128MB DIMM), 192MB (in one 64MB DIMM and one
128MB DIMM), or 256MB (in two 128MB DIMMs). See Installing a Memory Upgrade
page 60
for the upgrade procedure.
Enterasys Xpedition 8000/8600 Getting Started Guide
G8M-CM
10/100 Mgmt
Console
Figure 3. Front panel of the control module
PC slot 0
OK
HBT
ERR DIAG
PC slot 1
Hardware Overview
CONTROL MODULE
Online Offline
Hot
Swap
on
13
Advertisement
Table of Contents
