Replacing Armrest Arm Pad - Invacare Action 2 Basic Service Manual

Replacing Armrest Arm pad

NOTE: For this procedure, refer to FIGURE 3.3.
1. Remove the mounting screws that secure the arm pad to the armrest assembly.
2. Replace arm pad and securely tighten with the existing mounting screws.
3. Repeat STEPS 1
Mounting screw
FIGURE 3.3
Replacing Armrest Arm Pad
2 for the opposite side if necessary.
-
Armpad
Assembly description
CR FL CS M 5x25
Arm pad fixation on tube
TX or FL CS M 5x25
Armrest assembly
1 6
SECTION 3—ARMRESTS
Screw Tool
current PH
Philips or Torx T25
Torque
4 ±1 Nm