Positioning Swing-Back Arms; Replacing Armrest Pad - Invacare 6895 Owner's Operator And Maintenance Manual

SECTION 8
POSITIONING SWING-BACK ARMS (FIGURE 2)
Make sure the armrest release lever is in the locked position before using
the Rehab Shower Commode chair.
1. Unlock the swing-back arm by pressing the arm release lever towards the arm
frame.
2. Pull the front of the swing-back arm straight up/out of the arm socket and push back
towards the rear of the Shower Commode chair.
3. To lock the swing-back arm, pull the swing-back arm forward and then push down-
ward into the arm socket until an audible "click" is heard.
Swing- Back Arm
REPLACING ARMREST PAD (FIGURE 3)
1. Remove the mounting screws that secure the armrest pad to the arm.
2. Replace armrest pad and securely tighten with the existing mounting screws.
FIGURE 3 - REPLACING ARMREST PADS
Rehab Shower Commode Chair
WARNING
LOCK
FIGURE 2 - SWING-BACK ARMS
Mounting
Screws
26
UNLOCK
Arm Frame
Arm Release
Lever
Arm Socket
Armrest Pad
Arm
ARMS
Part No. 1118394