Configuring 802.1X Settings - Intermec PD41 Manual

Chapter 3 — Configuring the Printer
54
Understanding the Wireless LAN Settings (continued)
Setting
Active WEP key
Authentication
WPA
WPA Pre-shared key
WPA2
Roaming setting
Current channel
AP MAC Address
Signal strength
Speed
Region

Configuring 802.1x Settings

You only see the 802.1x settings page if you have the optional wireless
interface installed in your printer. Use the 802.1x page to view and
change 802.1x security settings.
To configure 802.1x settings
1 Click Network Admin > 802.1x.
2 View or update your settings.
3 Click Submit 802.1x settings.
Description
Chooses the active WEP key.
Sets the type of authentication for you use for WEP
keys. You can choose between Auto, Open System,
and Shared.
Sets the Wi-Fi Protected Access (WPA) to either on
or off.
Sets the WPA Pre-shared key.
Sets the Wi-Fi-Protected Access version 2 to either
on or off.
Sets the roaming reluctancy to 1, 2 or 3. Setting the
roaming reluctancy to 0 turns off the roaming
feature.
Shows the current channel the printer is using.
(Read only) MAC address of the access point to
which the printer is connected.
(Read only) Radio signal strength of the access
point.
(Read only) Speed of the current connection.
(Read only) Shows the country short names
provided by the 802.11d standard for the currently
selected region or country.
PD41 and PD42 Commercial Printer User's Manual