Intermec PD41 Manual page 120

Copy Length (b)
Measurement
8 dots/mm (203 dpi)
Maximum
Minimum
11.81 dots/mm (300 dpi)
Maximum
Minimum
PD41 and PD42 Commercial Printer User's Manual
Tickets With Black Mark (Mark Stock)
Media Width (a)
Measurement Value
Maximum 118 mm (4.65 in)
Minimum 25.0 mm (1.00 in)
Fingerprint
1270 mm (50 in)*
6.0 mm (0.2 in)
558.8 mm (22 in)*
6.0 mm (0.2 in)
* The print length is limited by memory constraints
LSS Detection Position (c)
Variable from 0 to 57 mm (0 to 2.24 in).
Black Mark Width (d)
The detectable width of the black mark should be at least 5.0 mm
(0.2 in) on either side of the LSS detection point.
Black Mark Length (e)
Measurement Value
Maximum 25.0 mm (0.98 in)
Common 5.0 mm (0.2 in)
Minimum 3.0 mm (0.12 in)
Black Mark Y-Position (f)
Intermec recommends that you place the black mark as close to the
front edge of the ticket as possible and use a negative Stop Adjust
value to control the media feed, so the tickets can be properly torn off.
Appendix A — Specifications
IPL
600 mm (23 in)
6.0 mm (0.2 in)
406.4 mm (16 in)
6.0 mm (0.2 in)
ESim
600 mm (23 in)
6.0 mm (0.2 in)
406.4 mm (16 in)
6.0 mm (0.2 in)
105