Intermec PD41 Manual page 116

Label Length (d)
Measurement
8 dots/mm (203 dpi)
Maximum
Minimum
11.81 dots/mm (300 dpi)
Maximum
Minimum
PD41 and PD42 Commercial Printer User's Manual
Self-Adhesive Labels
Media Width Including Liner (a)
Measurement Value
Maximum 118 mm (4.65 in)
Minimum 25.0 mm (1.00 in)
Liner (b)
The backing paper must not extend more than a total of 1.6 mm
(0.06 in) outside the labels and should protrude equally on both sides.
Label Width Excluding Liner (c)
Measurement Value
Maximum 116.4 mm (4.58 in)
Minimum 23.8 mm (0.94 in)
Fingerprint
1270 mm (50 in)*
6.0 mm (0.2 in)
558.8 mm (22 in)*
6.0 mm (0.2 in)
* The print length is limited by memory constraints
Label Gap (e)
Measurement Value
Maximum 26.0 mm (1.02 in)
Recommended 3.0 mm (0.12 in)
Minimum 1.2 mm (0.05 in)
Appendix A — Specifications
IPL
600 mm (23 in)
6.0 mm (0.2 in)
406.4 mm (16 in)
6.0 mm (0.2 in)
ESim
600 mm (23 in)
6.0 mm (0.2 in)
406.4 mm (16 in)
6.0 mm (0.2 in)
101