Intermec PD41 Manual page 121

Appendix A — Specifications
106
Media Type
Set media type to one of these values:
• Fingerprint: TICKET (w MARK)
IPL: MARK
•
• ESim: MARK
Note: The black mark should be non-reflective carbon black on a
whitish background. Do not allow a perforation to break the edge of
the media, because the media may split and jam the printer.
Note: Try to avoid preprint that may interfere with the detection of
the black mark. However, if your are running Fingerprint, you can use
the command LBLCOND to temporarily disable the sensor for a
specified amount of media feed to avoid unintentional detection. For
help, see the
Intermec Fingerprint Command Reference
a
b
c
e
d
f
TICKETS
WITH MARKS
Feed direction
Tickets With Black Mark (Mark Stock)
PD41 and PD42 Commercial Printer User's Manual
Manual.