Custom Engineering TG1260 series User Manual page 63

Then send this command to the printer
0x1B
$ 1 C $ C 0 $ 3 4
[Name] Total cut and automatic paper moving back.
[Format] ASCII
Hex
Decimal
[Description] This command enables cutter operation and executes a total cut and automatic paper
moving back; if there is no cutter, a disabling flag is set any subsequent cutting
commands will be ignored.
[Notes] • The printer waits until all the paper movement commands have been completed
before executing total cut
TG1260/2460
In this example; d0=FF; d1=03; d2=FC; d3=0F
0xFF 0x02 0xF8
N. logo Dimension
FS { } 4
1C C0 34
28 192 52
2. PRINTER FUNCTIONS
d0 d1 d2
0x7F 0xFF 0 x 03
2-46
d3
0xFC 0x0F...