Usb Connector - Sony PDW-700 Operation Manual

For details, refer to the Maintenance Manual.
• This connector also inputs a return video signal.
You can display the HD-Y signal in the
viewfinder screen while holding the RET button
down with RETURN VIDEO set to ON on the
GENLOCK page of the OPERATION menu.
e TC IN (timecode input) connector
(BNC type)
To apply an external lock to the timecode of this
unit, input the reference timecode.
For details of timecode, see "Setting the timecode"
on page 62.
f TEST OUT connector (BNC type)
This connector outputs the video signal for a
video monitor. The output signal can be selected
from composite video, HD-Y, R, G, B, and a
composite video signal like that displayed in the
LCD monitor.
If the output signal is set to one of R, G, or B, then
this setting changes to HD-Y when the camcorder
is powered off and on again.
Depending on menu settings, menus, time code,
and shot data can be superimposed on the image
on the monitor. This connector can also be used to
synchronize the time code of an external VTR
with the time code of the camcorder.
For details on how to select the test output signal,
refer to the Maintenance Manual.
g TC OUT (timecode output) connector
(BNC type)
To lock the timecode of an external VTR to the
timecode of this unit, connect this connector to
the external VTR's timecode input connector.
26 Locations and Functions of Parts and Controls
Rear
5 6
8 9 0
a TALLY (back tally) indicator (red)
Lights up during recording. It will not light if the
TALLY switch is set to OFF. This indicator also
flashes to indicate warnings (see page 19) in the
same manner as the REC/TALLY indicator in the
viewfinder.
For details, see "Operation Warnings" on page 181.
b TALLY switch
Set to ON to activate the TALLY indicator
function.
c USB connector
This is a USB 2.0 connector for maintenance.
d
(network) connector (RJ-45 type)
This is a 10Base-T/100Base-TX connector for
network connection.
Note
When you connect the network cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
1
2
3
4
7
qa qs qd