Shutter Speed - Sony PDW-700 Operation Manual

n Gain value
Indicates the gain value (in dB) of the video
amplifier, as set by the GAIN selector.
o Shutter speed
Indicates the shutter speed or the shutter mode.
However, if the SHUTTER selector (see page 15)
is set to OFF, nothing is displayed.
For details of the displayed shutter speed, see
"Setting the Electronic Shutter" on page 54.
p Operation/alarm message display area
For details, see "Operation/alarm messages" on
page 184.
q Audio level
Indicates the level of audio channel 1 and channel
2. The peak indication of the VDR level meter is
related as follows to the audio level.
1
2
3
-52 -28
1Audio channel 1 level indicator
2Audio channel 2 level indicator
3VDR level meter indicator
The segment colors change from gray to white at
or above the AU REF LEVEL set on the AUDIO-
2 page of the MAINTENANCE menu. This
setting does not affect the relationship between
the number of lit segments and the audio levels.
The example in the above figure shows the colors
when AU REF LEVEL is set to –20 dB.
r Remaining disc capacity
Indicates the remaining recording time (in
minutes) of the disc.
-20 -12 -8 (dB)
Examples of remaining recording time indication
Indication Remaining recording
time
90 < More than 90 minutes
90 - 85 90 to 85 minutes
85 - 80 85 to 80 minutes
. .
. .
. .
20 - 15 20 to 15 minutes
15 - 10 15 to 10 minutes
10 - 5 10 to 5 minutes
5 - 0 5 to 0 minutes
No display 0 minute
s Remaining clips display
Displays the remaining number of clips that can
be recorded. The display flashes once per second
when the number of remaining clips is less than
10.
t Iris setting/auto iris override
Indicates the F value (iris setting) of the lens.
Auto iris override is shown by an indicator made
up of two segments each on the upper and lower
sides.
For details, see "Changing the Reference Value for
Automatic Iris Adjustment" on page 57.
u Setting change and adjustment
progress message display area
For details, see "Change confirmation/adjustment
progress messages" on page 142.
Locations and Functions of Parts and Controls 31