Sony PDW-700 Operation Manual page 96

3
Select Trim Sub Clip, and then press the
SET/S.SEL button or the MENU knob.
The Clip List (Trim) screen appears.
Clip List (Trim)
01:17:33:08
TCR
Like the clip playback screen, this screen
allows you to play and search all clips on the
disc.
To display a list of In and Out point
operations that you can perform
Press the MENU button.
4
When you find the point that you want
to make the start point, select "IN" and
then press the SET/S.SEL button or the
MENU knob.
The timecode of the new In point appears in
the timecode display, and the Total (total
duration) and DUR (clip duration) displays
are updated.
5
When you find the point that you want
to make the end point, select "OUT"
and then press the SET/S.SEL button or
the MENU knob.
The timecode of the new Out point appears in
the timecode display, and the Total (total
duration) and DUR (clip duration) displays
are updated.
To cue up the In point or Out point
Display the Thumbnail Menu, select Cueup
Inpoint or Cueup Outpoint, and then press the
SET/S.SEL button or the MENU knob.
To cancel the In point or Out point setting
Display the Thumbnail Menu, select Reset
Inpoint or Reset Outpoint, and then press the
SET/S.SEL button or the MENU knob.
The In point or Out point setting returns to
the previous value.
6
Select OK, and then press the SET/
S.SEL button or the MENU knob.
7
Repeat steps 1 to 6 as required.
8
Save the clip list (see page 97).
96 Scene Selection (Clip List Editing)
001/034
00:13:48:24
Total
00:00:21:27
DUR
IN
01:17:33:08
OUT
01:17:55:05
019/035
OK
CLIP
Cancel
To delete sub clips
See page 86 for more information about thumbnail
screen operations.
1
Select the clips to delete in the clip list
thumbnail screen (multiple selections
possible).
2
Display the Thumbnail Menu.
3
Select Delete Sub Clips, and then press
the SET/S.SEL button or the MENU
knob.
A message appears asking you to confirm the
deletion.
4
Select OK, and then press the SET/
S.SEL button or the MENU knob.
5
Repeat steps 1 to 4 as required.
6
Save the clip list (see page 97).
To play the clip list
Use the clip list thumbnail screen to play the clip
list (see page 89).
To change the starting timecode of clip
lists
The timecode of clip lists is continuous timecode,
unrelated to the timecode of the original clips. By
default the timecode (LTC) of the start of the clip
list is 00:00:00:00, but it can be set to any value.
See page 86 for more information about thumbnail
screen operations.
1
In the clip list thumbnail screen, display
the Thumbnail Menu.
2
Select Set Start Time Code, and then
press the SET/S.SEL button or the
MENU knob.
The Set Start Time Code screen appears.
Set Start Time Code
TC 1 2 : 3 4 . 5 6 : 2 1
Preset TC 00:00:00:00
OK
Cancel