Using The User Menu (Example Menu Operation) - Sony PDW-700 Operation Manual

To select a menu or setting item
001 OUTPUT1 TOP
SDI OUT1 SELECT: OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT: VBS
TEST OUT SUPER :
When b appears, turn the MENU knob to move b
up and down.
To change a setting value
001 OUTPUT1 TOP
SDI OUT1 SELECT: OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT:? VBS
TEST OUT SUPER :
When ? blinks, turn the MENU knob to change
the setting (ON/OFF, value, etc.).
To confirm the selection of a menu, a
setting item, or a setting value
Each time you press the MENU knob, the menu
display switches in the following sequence.
001 OUTPUT1 TOP
SDI OUT1 SELECT: OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT: VBS
TEST OUT SUPER :
001 OUTPUT1 TOP
SDI OUT1 SELECT: OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT:? Y
TEST OUT SUPER :
Example: When using the OPERATION menu
If the menu has not been used
TOP menu
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
PAINT
MAINTENANCE
FILE
DIAGNOSIS
ADVANCED
If the menu has
been used before
Menu selection mode
?001 OUTPUT1 TOP
SDI OUT1 SELECT: OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT: VBS
TEST OUT SUPER :
Setting item selection mode
001 OUTPUT1 TOP
SDI OUT1 SELECT: OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT: VBS
TEST OUT SUPER :
Setting value selection mode
001 OUTPUT1 TOP
SDI OUT1 SELECT:? OFF
SDI OUT2 SELECT: OFF
SDI OUT2 SUPER : OFF
TEST OUT SELECT: VBS
TEST OUT SUPER :
Note
If the TOP menu has not been displayed since the
camcorder is powered on, "TOP" does not appear at the
upper right on the above screen, and you cannot go to the
TOP menu. In this case, follow the procedure in "To
display the TOP menu" (page 134).
To display the TOP menu when another
menu is displayed
Move b to "TOP" displayed at the top right of
each page of the menu, and press the MENU
knob. Or flick the CANCEL/PRST/ESCAPE
switch repeatedly to ESCAPE until the TOP
menu is displayed.
Using the USER menu (example
menu operation)
This section explains menu operations using the
USER menu as an example. The operations are
CONTENTS page
?000 CONTENTS TOP
01.OUTPUT 1
02.OUTPUT 2
03.SUPERIMPOSE
04.LCD
05.REC FUNCTION
06.ASSIGNABLE SW
07.POWER SAVE
08.VF DISP 1
09.VF DISP 2
10.VF DISP 3
Menu selection page
?000 CONTENTS TOP
01.OUTPUT 1
02.OUTPUT 2
03.SUPERIMPOSE
04.LCD
05.REC FUNCTION
06.ASSIGNABLE SW
07.POWER SAVE
08.VF DISP 1
09.VF DISP 2
10.VF DISP 3
Menu Operations 135