Adjusting The Viewfinder Focus And Screen - Sony PDW-700 Operation Manual

3
1Locking ring
2Locking ring match mark
3Match mark on the viewfinder barrel
2
Detach the eyepiece.
Match mark on end of eyepiece
To reattaching the eyepiece
1
Align the red marks on the eyepiece
locking ring and the viewfinder barrel.
2
Align the red mark on the end of the
eyepiece end with the red marks on the
eyepiece locking ring and the
viewfinder barrel. Then insert the
eyepiece into the viewfinder barrel.
3
Turn the eyepiece locking ring
clockwise until its "LOCK" arrow
points at the red mark on the viewfinder
barrel.
When the eyecup is worn out, replace it with a
new one.
For details of a replacement eyecup, contact a Sony
service representative.

Adjusting the viewfinder focus and screen

To adjust the viewfinder focus
Turn the diopter adjustment ring until the
viewfinder image is sharpest.
36 Attaching the Viewfinder
1
2
Diopter adjustment ring
To adjust the viewfinder screen
Adjust the brightness, contrast, and peaking of the
viewfinder screen with the controls shown below.
1
PEAKING
ZEBRA
DISPLAY
ON
OFF
MOMENT
ASPECT
1PEAKING control
2CONTRAST control
3BRIGHT control
2 3
CONTRAST BRIGHT
TALLY
HIGH
OFF
LOW