Editing Clip Lists - Sony PDW-700 Operation Manual

Unit memory
Current clip listCan be edited
(adding, deleting, and
reordering sub clips)
m M
SAVE
Disc
C0001 (Clip 1)
C0002 (Clip 2)
C0003 (Clip 3)
:
:
Clip list playback
Clips and clip lists are saved together on a disc.
To play a clip list, insert a disc into the unit, load
the clip list that you want to play, and press the
PLAY button.
Clips are played according to the data in the clip
list.

Editing clip lists

To add sub clips
Adding sub clips from the clip thumbnail screen
The following procedure explains operations in
the clip thumbnail screen. You can proceed in the
same way in the expand thumbnail screen and the
chapter thumbnail screen.
See page 86 for more information about thumbnail
screen operations.
1
In the clip thumbnail screen, select the
clip that you want to add as a sub clip
(multiple selections possible).
2
Display the Thumbnail Menu.
3
Select Add Sub Clips, and then press the
SET/S.SEL button or the MENU knob.
The Add Sub Clip screen appears.
An I cursor appears at the bottom of the Add
Sub Clip screen (in the Scene Selection
window). The I cursor indicates the location
where the currently selected clip will be
inserted.
94 Scene Selection (Clip List Editing)
t
Clip list
playback and
thumbnail
display
LOAD
E0001 (Clip list 1)
E0002 (Clip list 2)
E0003 (Clip list 3)
:
:
E0099 (Clip list 99)
Add Sub Clip
TC 00:30:25:11 TC 00:30:40:13
TC 00:24:24:29 TC 00:24:34:27
Scene Selection
To display the total duration after
addition of the selected clip
Press the SHIFT button.
4
In the Scene Selection window, move
the I cursor to the location where you
want to insert the clip. (The existing
thumbnails arrange themselves to the
left and right of the I cursor.)
5
Press the SET/S.SEL button or the
MENU knob.
The selected clip is inserted as a subclip and
a "+" mark appears in the Scene Selection
window.
To check the addition results
Move the cursor.
6
Press the RESET/RETURN button.
This returns you to the Thumbnail Menu.
7
Repeat steps 1 to 6 as required to add
more clips.
8
Save the clip list (see page 97).
In step 1, you can also perform a shortcut
operation by pressing the SET/S.SEL button with
the SHIFT button held down.
Adding sub clips from the clip list thumbnail
screen
See page 86 for more information about thumbnail
screen operations.
1
Display the Thumbnail Menu.
2
Select Add Sub Clips, and then press the
SET/S.SEL button or the MENU knob.
The Add Sub Clip screen appears.
002 017/035
TC 01:01:28:25 TC 00:09:43:14
TC 00:24:46:22 TC 00:24:56:24
00:13:48:24
TOTAL