Mounting The Lens - Sony PDW-700 Operation Manual
Professional disc camcorder
Hide thumbs
Also See for PDW-700:
- Operation manual (213 pages) ,
- Brochure & specs (28 pages) ,
- Maintenance manual (300 pages)
Table of Contents
Advertisement
Mounting the Lens
First power off the camcorder, and then mount the
lens using the following procedure.
For information about using the lens, refer to the
operation manual for the lens.
3
Lens mount
securing rubber
5
4
2
1
1
Push the lens locking lever up and
remove the lens mount cap from the
lens mount.
2
Align the center pin on the lens with the
center slot in the lens mount, and insert
the lens into the mount.
3
Holding the lens in place, push the lens
locking lever down to lock the lens.
Caution
If the lens is not firmly locked, it may come off
while the camcorder is being used. This could cause
a serious accident. Make sure the lens is firmly
locked. It is recommended that the lens mount
securing rubber be put on the lens locking lever as
illustrated above.
4
Connect the lens cable to the LENS
connector.
5
Secure the lens cable with the cable
clamps.
Page 39
Advertisement
Table of Contents
