File Access Mode File Operations; Making Fam Connections - Sony PDW-700 Operation Manual

File Access Mode File
Operations
File access mode operating environment
Operating system requirements for file operations
by file access mode (called FAM below) are as
follows.
Computer operating system: Microsoft
Windows XP Professional SP2, or Microsoft
Windows Vista Business/Ultimate (32 bit)
Preparations
Install the FAM driver on the remote computer.
To install the FAM driver
Insert the supplied CD-ROM (Proxy Browsing
Software PDZ-1) in the CD-ROM drive of the
computer and execute the Setup.exe file, then
follow the installation instructions.
For details, refer to the ReadMe file contained on the
CD-ROM disc.
Note
Use Version 2.01 or higher of the FAM driver. The FAM
driver on the supplied CD-ROM is Version 2.01 or
higher.
If a FAM driver is already installed on your computer,
check the version (see the next section).
To check the FAM driver version
For Windows XP:
Select Control Panel > Add or Remove Programs
> ProDisc, and click on "Click here for support
information."
For Windows Vista:
(1) Select Control Panel > Programs, open the
Programs and Features window, right click in the
window's header bar (including the Name,
Publisher, and other headers), and select Others...
(2) In the Choose Details dialog, check the
Version check box and click OK. The Version
column is displayed, allowing you to check the
version of ProDisc.
To enable FAM connections over the i.LINK
connector
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Turn the MENU knob to scroll to the
POWER SAVE page of the
OPERATION menu, then press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 134.
U07 POWER SAVE
ETHERNET/USB
iLINK(FAM)
REC AUDIO OUT
2
Move b to i.LINK(FAM) then press the
MENU knob.
3
Turn the MENU knob to select
"ENABL", then press the MENU knob.
The message "Valid after power off."
appears.
4
Power the camcorder off, and then
power it on again.
The setting made in step 3 is enabled.

Making FAM connections

1
If there is a disc loaded in this unit, put
the unit into the following state.
Recording, playback, search and other
disc operations: Stopped
Thumbnail indicator: Off
Disc access by clip deletion, disc
formatting, or other operation:
Stopped
Picture Cache function and Interval Rec
function: Off
MENU ON/OFF switch: OFF
Unsaved current clip list: Save or clear
2
If this unit is connected to a remote
computer by FTP, log out from the FTP
session (see page 170).
3
Connect the (i.LINK) S400 connector
on this unit to the i.LINK (IEEE1394)
connector on the remote computer,
using an i.LINK cable.

File Access Mode File Operations

TOP
: DSABL
: DSABL
: EE
167