Sony PDW-700 Operation Manual page 173

Syntax: CWD <SP> <path-name> <CRLF>
Moves to a directory as follows, depending on
whether a directory is specified with <path-name>.
• Directory specified: To the specified directory
• No specification: To the root directory
Input example: CWD General
CDUP
Moves one level up in the directory structure (makes the
parent of the current directory be the current directory).
Syntax: CDUP <CRLF>
MKD
Creates a new directory.
Note
Directories can be created only in the General directory.
For details, see "File operation restrictions" (page
163).
Syntax: MKD <SP> <path-name> <CRLF>
RMD
Deletes a directory.
Note
Directories can be deleted only in the General directory.
For details, see "File operation restrictions" (page
163).
Syntax: RMD <SP> <path-name> <CRLF>
Extended commands
In the command syntax column, <SP> means a
space, entered by pressing the space bar, and
<CRLF> means a new line, entered by pressing
the Enter key.
SITE REPF
Sends an MXF file from the specified path on this unit to
the remote computer. This command allows you to
specify a segment in the body of the MXF file (composed
of video and audio data), for transfer of the required
segment only.
Notes
• A segment greater than the file size cannot be
specified.
• This command cannot be used when the path name
contains a space. Use the SITE REPFL command
instead.
Syntax: SITE REPF <SP> <path-name> <SP>
<start-frame> <SP> <transfer-size>
<CRLF>
<start-frame> specifies an offset from the start of
the file. Data is transferred from the video frame at
the offset (the first frame is 0).
<transfer-size> specifies the number of video
frames to transfer (specify 0 to transfer to the end of
the file).
Input example: SITE REPF Clip/C0001.MXF 5
150 (Transfer C0001.MXF. Body data is
transferred only from frame 6 to frame
150.)
SITE REPFL
Sends an MXF file from the specified path on this unit to
the remote computer. This command allows you to
specify a segment in the body of the MXF file (composed
of video and audio data), for transfer of the required
segment only.
Note
A segment greater than the file size cannot be specified.
Syntax: SITE REPFL <SP> "<path-name>" <SP>
<start-frame> <SP> <transfer-size>
<CRLF>
<path-name> specifies the path name of the file to
transfer. Enclose the path name in double quotation
marks.
<start-frame> specifies an offset from the start of
the file. Data is transferred from the video frame at
the offset (the first frame is 0).
<transfer-size> specifies the number of video
frames to transfer (specify 0 to transfer to the end of
the file).
Input example: SITE REPFL "Clip/sakura
0001.MXF 5" 150 (Transfer sakura
0001.MXF. Body data is transferred only
from frame 6 to frame 150.)
SITE FSTS
Acquires the system status of this unit.
One of the following status codes is sent.
0: Initial state, or no disc is loaded.
1: File system mount is OK.
3: File system mount is not OK.
Syntax: SITE FSTS <CRLF>
SITE MEID
Acquires the media ID of the disc loaded in this unit.
FTP File Operations 173