Sony PDW-700 Operation Manual page 149

Function Description
TEST OUT Assigns the function to
CHARACTER switch whether or not text is
superimposed on the video
signal to be output from the
TEST OUT connector.
MARKER Assigns the ON/OFF
function to display all
a)
markers.
RETAKE Assigns the function to delete
the last recorded clip.
ATW Assigns the ON/OFF
function of auto-tracing
white balance.
RETURN Assigns the ON/OFF
VIDEO function to display the image
of the return video signal on
the viewfinder to the
b)
switch.
LENS RET Assigns the same function as
that of the RET switch on the
lens to the switch.
REC SWITCH Assigns the VTR S/S (start/
stop) function to the switch.
TURBO Assigns the turbo gain
SWITCH function to the switch.
ZEBRA Assigns the zebra pattern
display function to the
switch.
FREEZE MIX Outputs the freeze image and
camera input alternately, to
allow frame alignment
(automatic switching).
FREEZE MIX Outputs the freeze image and
(Manual) camera input alternately, to
allow frame alignment
(manual switching).
D5600 Applies an electrical 5600 K
filter.
ZOOM TELE/ When using a serial lens,
c) assign the ZOOM TELE
WIDE
setting to ASSIGN 3, and the
WIDE setting to ASSIGN 4.
ZOOM WIDE/ When using a serial lens,
c) assign the ZOOM WIDE
TELE
setting to ASSIGN 3, and the
TELE setting to ASSIGN 4.
SHOT Assigns the function to
MARK1 record a SHOT MARK 1
essence mark.
SHOT Assigns the function to
MARK2 record a SHOT MARK 2
essence mark.
Function Description
UA01 to Assigns the items assigned in
d) the ASSIGN SEL menu.
UA10
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 1/3/4 switch allows you to display or
not to display all markers.
b) Even if the RETURN VIDEO item is set toFF on
the GENLOCK page of the MAINTENANCE
menu, you can use this switch to display the
image of the return video signal on the
viewfinder.
c) Only the Assign 3 SEL and Assign 4 SEL screens
appear.
d) This does not appear if nothing is assigned in the
Assign menu.
Functions to be assigned to the ASSIGN 2
(slide-type) switch
Function Content
OFF Assigns no function.
CACHE Assigns execution of
recording in picture
cache mode.
TEST OUT Assigns the function
CHARACTER to switch whether or
not the characters are
mixed to the video
signal to be output
from the TEST OUT
connector.
MARKER Assigns the ON/OFF
function to display all
markers.
ZEBRA Assigns the zebra
pattern display
function to the switch.
D5600 Applies an electrical
5600 K filter.
EXT REC Selects whether or not
CONTROL recording control of
external devices
connected through the
CCZ connector (26-
pin) of a CA-702 is
possible.
Adjustments and Settings From Menus
a)
149