Removal Of Units - Konica Minolta 2300 Service Manual

4-4.

Removal of Units

(1) Removal of the Right-side Door
1. Remove the Front Door.
2. Remove the Controller Protective Cover.
3. Remove the Rear Cover.
4. Remove the Front Cover.
5. Remove the Right-side Rear Cover.
4131D027AA
4131D027AA
(2) Removal of the Print Head Unit (PH)
1. Remove the Front Door.
2. Remove the Controller Protective Cover.
3. Remove the Rear Cover.
4. Remove the Front Cover.
5. Remove the Right-side Cover.
4131D027AA
6. Remove the harness and connector.
7. Slightly open the Right-side Door and, supporting
the door with your hand, remove one screw and
two C-rings.
8. Pull out the shaft and remove the Right-side
Door.
6. Remove the harness and connector.
7. Slightly open the Right-side Door and, supporting
the door with your hand, remove one screw and
two C-rings.
106