Konica Minolta 2300 Service Manual page 102

(3) Removal of the Controller Board
1. Remove the Controller Board Protective Cover.
4131D055AB
(4) Removal of the Power Unit
1. Open the Right-side Door.
2. Remove the Top Front Cover.
3. Remove the Top Cover.
4. Remove the Left-side Cover.
4131D013AA
4131D014AB
2. Remove the harness and connector.
3. Remove seven screws and the Controller Board
(PWB-P).
5. Remove three screws and the protective cover.
6. Remove the harness, connector, and PWB sup-
port.
7. Remove three screws and the Power Unit.
102