Konica Minolta 2300 Service Manual page 122

(14) Removal of the Manual feed tray
1. Remove the Top Front Cover.
2. Remove the Top Cover.
3. Remove the Front Cover.
4. Remove the Left-side Cover.
4131D021AA
4131D022AA
(15) Disassembly of the Fusing Unit
1. Remove the Fusing Unit.
See page 108
4131D050AB
4131D051AA
5. Remove two screws and the switch box.
6. Snap off the C-ring and remove the Manual Feed
Tray.
2. Remove two screws and the cover.
3. Remove six screws and the Heater Lamp.
Notes for installation
Be sure to install the screws securing the leads in the
correct locations.
122