Konica Minolta 2300 Service Manual page 30

(5) Controller magicolor 2350 (PWB-P)
CPU
Memory configuration
Standard I/F
Optional I/F
Optional Hard Disk
Resident Emulations
Fonts
System Software
Resolution
Printer Driver
(6) Controller magicolor 2300W (PWB-P)
CPU
Memory configuration
Standard I/F
Resolution
Printer Driver
Compatible clients:
PC
CPU
Hard disk free space
RAM
IBM Mercury, Power PC 405, 200 Mhz processor core SOC,
system bus speed of 100 Mhz
Boot ROM (512KB); 12MB Flash ROM (supports up to 24MB)
128 MB standard, upgreadeable to 384 MB via 1 DIMM slot
Ethernet (10/100BASE-TX, RJ-45)
IEEE1284 (Compatible/Nibble/ECP/EPP)
USB 1.1
Dongle (803.11b & Bluetooth) via parallel
IDE Hard Disk Kit (includes daughterboard, hard disk and TOD
clock); IDE Hard Disk Kit (without hard disk) for third party hard
disks.
PostScript 3, PCL 5, XL, PDF v. 1.3 (requires optional hard
disk), Line printer
137 PostScript fonts, 90 PCL fonts (80 scalable & 10 bitmap)
Upgradable via FLASH at initial release, later upgradeable via
Mask ROM.
600 x 600 dpi, 1200 x 600 dpi, 2400 x 600 dpi
OS: Windows 95/98/Me, Windows NT4.0, Windows 2000, Win-
dows XP
N1-chip (Naltec original ASIC)
64 KB (In ASIC)
Standard RAM: 32MB
IEEE1284 (Compatible/Nibble/ECP)
USB Type B connector
600 x 600 dpi, 1200 x 600 dpi
OS: Windows 95/98/Me, Windows 2000, Windows XP
IBM PC or compatible
CPU clock of 300 MHz or more recommended
Minimum 256 MB
128 MB: Printer drive/Status display
128 MB: Image processing area
At least 16 MB (Windows 95/98)
At least 32 MB (Windows Me)
At least 64 MB (Windows 2000 Professional)
At least 128 MB (Windows XP Home Edition/Professional)
30