Konica Minolta 2300 Service Manual page 113

4131D020AA
(5) Removal of the Rack Motor
1. Open the Right-side Door.
2. Remove the Top Front Cover.
3. Remove the Top Cover.
4. Remove the Rear Cover.
5. Remove the Left-side Cover.
6. Remove the Controller Protective Cover.
4131D016AA
4131D017AA
4131D068AA
7. Remove four screws and the Main Motor Assy.
7. Remove seven screws and the Controller Box.
8. Remove the connector and PWB Support.
9. Remove four screws and the High Voltage Unit
(HV).
10. Remove one screw and the Belt Cleaner Separa-
tion Solenoid.
113