Konica Minolta 2300 Service Manual page 91

(5) Cleaning of the Transport Roller
C4131o073AC
(6) Replacement of the Waste Tonner Bottle
C4131o049AA
C4131o041AA
(7) Cleaning of the Areas around Waste Toner Collections Port
C4131o040AA
1. Open the Right-side Door.
2. Using a soft cloth dampened with alcohol, wipe
the Transport Roller clean of dirt.
1. Open the Front Door.
2. Hold onto the handle of the Waste Toner Bottle
and, while slightly pulling the bottle to the front,
pull it upward.
3. Mount the cap to the waste toner collecting port.
NOTE
Discard the Waste Toner Bottle according to the
applicable local regulation.
4. To reinstall, reverse the order of removal.
1. Open the Front Door.
2. Remove the Waste Toner Bottle.
3. Wipe the areas around the waste toner collecting
port clean of dirt using a soft cloth dampened with
alcohol.
91