To Fax Using Chain Dial - Konica Minolta Fax Kit (FX-3) User Manual

3

To fax using chain dial

Faxes can be sent to recipients that are specified using any combination of one-
touch dial keys, speed dial numbers, direct input using the 10-Key Pad, and the
[Redial] key.
As an example, the following procedure describes how to specify recipients using
one-touch keys, then using the 10-Key Pad.
1
Press the [Speaker] key.
2
Press the desired one-touch key,
and then press the [Start] key.
3
After the message "SET DOC.
FACE UP" appears, use the 10-
Key Pad to enter the recipient's fax
number.
4
After the message "SET DOC.
FACE UP" appears, load the
document into the Automatic
Document Feeder.
5
Press the [Start] key.
3-6
3.1 Dialing
Fax Kit (FX-3)