6
Specifying the Setting for "SCAN CONTRAST"
1
Select the "TX OPERATION".
❍
Refer to "Selecting the "TX OPERATION" menu" on page 6-31.
2
Press the [1] key from the 10-Key
Pad to select "SCAN
CONTRAST".
3
Using the [ ] and [Ö ] keys, select
Ö
one of the five settings between
"LIGHT" and "DARK", and then
press the [Yes] key.
The "TX OPERATION" menu
appears again.
Specifying the Setting for "RESOLUTION"
1
Select the "TX OPERATION".
❍
Refer to "Selecting the "TX OPERATION" menu" on page 6-31.
2
Press the [2] key from the 10-Key
Pad to select "RESOLUTION".
3
Using the [ ] and [Ö ] keys, select
Ö
the desired resolution setting, and
then press the [Yes] key.
❍
The resolution settings appear
as follows.
STD: Standard
FINE: Fine
S/F: Super Fine
H/T: Half Tone
If "H/T" was selected, a screen appears, allowing you to make a detailed setting.
(Continue with step 4.) If any setting other than "H/T" was selected, the "TX
OPERATION" menu appears again.
6-32
6.2 Setting Up the Transmission
Fax Kit (FX-3)