Neogate Tg Series Installation; Placement Instructions; Installation Instructions; Connection Of Ethernet Ports - Yeastar Technology NeoGate TG100 Installation Manual

3. NeoGate TG Series Installation

To avoid unexpected accident, personal injury or device damage, please read the following instructions
before installing NeoGate TG Series Gateway.

3.1 Placement Instructions

 Ambient Temperature: to avoid overheating, please do not run NeoGate TG Series in the place where
the ambient temperature is above 104°F (40°C).
 Ventilation: please make sure that the device has good ventilation around.
 Anti-jamming: there may be some sources of interference that might affect the normal running of
NeoGate. It's highly recommended that the device
Should be placed away from high-power radio, radar transmitters and high frequency, and

high-current devices.
Is using independent power junction box and effective anti-grid interference measures have been

taken.
 Mechanical load: Please make sure that the device is placed steadily to avoid any accident that might
cause damage. If placed on the desktop, please ensure it is horizontally placed.

3.2 Installation Instructions

After placing NeoGate in a suitable place, please connect the power adapter and all other cables to complete
the installation.

3.2.1 Connection of Ethernet Ports

NeoGate TG Series provides one 10/100M adaptive RJ45 Ethernet LAN port.
 LAN Port Connection
Connect one end of a network cable to the LAN port of NeoGate, and the other end to any port of
company's LAN switch/router.
If the LAN port is connected to PC directly (not via a switch), please use cross-over cable.

3.2.2 Connection of GSM ports

NeoGate TG Series, available with four models, supports 1, 2, 4, 8, 16 GSM ports. To use the GSM ports, you
need to insert the SIM card and connect the antenna.
1. Connect the antenna.
Connect the antenna to the relevant place.
2. Insert SIM cards.
Push the SIM card into the card slot on the front panel.
http://www.yeastar.com
NeoGate TG Series Installation Guide
10/14