Table of Contents
Advertisement
System Initialize
1 –
Yes, 0 - No
10.2 HOW TO ENTER THE SETUP MENU
To setup or to change the RFK505 settings, the user has to enter the SETUP MENU
first. To do so, press the 8 times <0> key for Master ID (Default setting "00000000") and
<ENT> key and press Master Password (Default setting "3141") and the user can get into
SETUP MENU. There are 3 main SETUP MENUs and the user first gets into [SETUP
MENU F1]. The user can move to other SETUP MENU by pressing <F1> key for [SETUP
MENU F1], <F2> key for [SETUP MENU F2], and <F4> key for [SETUP MENU F4].
There are several SUB MENUs in the main SETUP MENU and the user can scroll up and
down the SUB MENU by pressing <4> and <6> key
in the main SETUP MENU. If the user pressed <ESC> key, RFK505 will be out of the
SETUP MENU and returned to normal operation. The user can also change the Master ID
in the [SETUP MENU F1]. The Master ID for SRK505U is 10 times <0> key (Default
setting "0000000000" ), and default Master Password is <3141>.
11. Operation
11.1
NORMAL OPERATION
In usual power on, the main lights on two red LED indicators of operating system status and
card reading status. If you present RF card to the reader, red LED indicator of card reading
status is changed to green color. Then the reader transmits card data to the controller and
turns on red LED indicator again to wait for next card data reading.
11.2 D
ATA OUTPUT FORMAT (SETUP MENU F2)
11.2.1 WIE
GAND OUTPUT FORMAT
1. Data format ( * : SRK505U)
Bit 1
Bit 2∼9
Bit 10∼25
* Bit 2 ~ 33
Bit 26
* Bit 34
Master Password
[3141]
: Even parity of bit 2 ~ bit 13
: Facility code (000 ~ 255)
: ID number (00000 ~ 65,535)
: ID number
(0000000001 to 4294967295)
: Odd parity
: Odd parity
17
System is Clear
Remove Wires!!
Advertisement
Table of Contents
