9
.3 DIAL UP MODEM
Please, see the Software manual.
9
.4 TCP/IP CONVERTER (EXTERNAL VERSION)
Please, see the Software manual.
10. Basic Settings
In the system ready, LCD
display model name,
YES
ENTER SETUP MENU
SETTINGIN SETUP MODE
END SETTING ?
10.1 INITIALIZATION OF RFK505
Before installation of the system and when it is not able to enter the setup menu (system
error or something wrong), the user has to Hardware initialize.
The user has to initialize H/W using an external reader port.
Turn off the system power and connect 3 wires (pink, cyan and black (GND)), and turn on
the system power. (Ref. 8.2 SYSTEM INITIALIZATION). Initializing will erase all stored data
incl. registered IDs data. Then, the user has to do setting the system parameter. Before the
first installation, the user must Hardware initialize.
POWER ON
GENERAL BOOT
INITIAL BEEP( - - - -)
SYSTEM READY
ID INPUT ?
YES
MASTER ID ?
NO
OUTPUT CONTROL OF EACH
STATUS
NO
YES
H/W RESET MODE
NO
NO
16
If you turn on the system power
after connected 3 wires (pink, cyan
and black(GND)), you can enter
system initialize mode.
INITIALIZE BEEP( - - -)
SYS. INITIALIZE ?
YES
WAIT INITIIAL MASTER P/W
("3141")
RIGHT ?
YES
SYSTEM INITIALIZE
WAITING REBOOT