Sample Programming For Timer - TIPTEL 545 SD Manual

Use the two lower selection buttons
and the control buttons (left/right)
to find what needs to be changed in
the selected time.
Make the desired settings using the
control buttons (up or down).
To set the order in which numbers
are dialled press the selection but-
ton next to "Message transfer on".
To delete a switching time press the
selection button next to the delete
symbol.
2s To delete the timer press the selec-
tion button next to the delete sym-
bol for 2 seconds.
To stop entering additional switch-
ing times press stop.
To stop the entry press stop several
times.

Sample programming for timer

You want your tiptel 545 SD to switch on OGM 1 on Mondays to Fridays at 17.00
and switch off at 08.00. When the office closes on Friday and over the weekend the
answering machine should use OGM 2 throughout. This requires 3 switching times.
Timer
The symbols have the following mean-

ings:

= Answering mode

= OGM

= Message transfer
= Call forwarding
A dash means that the previous status is
continued.
The display shows the currently set
order in which the 4 numbers for
message transfer are dialled.
The empty entry field is displayed again.
All switching times are deleted.
The settings are confirmed.
The initial state is again displayed.
60