Table of Contents
Advertisement
LCS-4 L-Band Combiner Switch
Remote Control Operation
Command
Arguments
(Instruction
for Cmd or
Parameter
Code and
Response
Type
qualifier)
to Query
Set RTC
DAY=
6 bytes,
Date
numerical
Set RTC
TIM=
6 bytes,
Time
numerical
Serial
N/A
9 bytes
Number
alpha
numerical
000000000
to
999999999
Retrieve
N/A
12 bytes
Equipment
alpha
Type
numerical
Lamp Test
LMP=
1 byte,
numerical
Relay Test
RLY=
1 byte,
value of 0,1
Description of Arguments
Note that all arguments are ASCII
numeric codes between 48 and 57.
A command in the form ddmmyy,
where: dd=day of the month between 01 and 31
mm=month of the year, between 01 and 12
yy=year, between 97 and 96 (1997 to 2000,
then 2000 to 2096)
Example: DAY=240457 would ne April 24, 2057
A command in the form hhmmss, indicating the time
from midnight:
where: hh=hours, between 00 and 23
mm=minutes, between 00 and 59
ss=seconds, between 00 and 59
Example: TIM=231259 would be 23 hours, 12 minutes,
and 59 seconds from midnight.
Query only.
Used to Query the units 9 digit serial number.
Target returns its S/N in the form XXXXXXXXX.
Example: RSN=000000165
Query only.
LCS-4 returns a string indicating the Model Number
and the value of internal software revision installed.
Example: RET=LCS-4 V1.0.3
Command only.
Indicates Test Mode to enable/disable all LED's,
where:
0=Normal Operation
1=LED's all On
2=LED's all OFF
Example: LMP=x
Note: In Mode 1 or 2, the unit automatically switches to
normal operation after 10 seconds.
Command only.
Indicates Test Mode to actuate.de-actuate Relays ,
where:
0=Normal Operation
1=Relays all actuated
2=Relays all de-actuated
Example: RLY=x
Note: In Mode 1 or 2, the unit automatically switches to
normal operation after 10 seconds.
Response to
Command
(Target to
Controller)
DAY= (message ok)
DAY? (received ok,
but invalid
arguments found)
DAY* (message ok,
but not permitted in
current mode)
TIM= (message ok)
TIM? (received ok,
but invalid
arguments found)
TIM* (message ok,
but not permitted in
current mode)
N/A
N/A
LMP= (message ok)
LMP? (received ok,
but invalid
arguments found)
RLY= (message ok)
RLY? (received ok,
but invalid
arguments found)
A-12
MN/LCS4.IOM
Query
(Instruction
code and
Response to query
qualifier)
(Target to Controller)
DAY?
DAY=xxxxxx (same format as
command arguments)
TIM?
TIM=xxxxxx (same format as
command arguments)
RSN?
RSN=xxxxxxxxx (same format as
command arguments)
RET?
RET=xxxxxxxxxxxx
(same format as command
arguments)
N/A
N/A
N/A
N/A
Revision 1
Advertisement
Table of Contents
