Table of Contents
Advertisement
LCS-4 L-Band Combiner Switch
Preface
Installation
The installation and connection to the line supply must be made in compliance to local or
national wiring codes and regulations.
The LCS-4 is designed for connection to a power system that has separate ground, line
and neutral conductors. The equipment is not designed for connection to power system
that has no direct connection to ground.
The LC-4 is shipped with a line inlet cable suitable for use in the country of operation. If
it is necessary to replace this cable, ensure the replacement has an equivalent
specification. Examples of acceptable ratings for the cable include HAR, BASEC and
HOXXX-X. Examples of acceptable connector ratings include VDE, NF-USE, UL, CSA,
OVE, CEBEC, NEMKO, DEMKO, BS1636A, BSI, SETI, IMQ, KEMA-KEUR and
SEV.
International Symbols:
Symbol
~
Telecommunications Terminal Equipment Directive
In accordance with the Telecommunications Terminal Equipment Directive 91/263/EEC,
this equipment should not be directly connected to the Public Telecommunications
Network.
Definition
Alternating Current
Fuse
ix
Symbol
Definition
Protective Earth
Chassis Ground
Revision 1
MN/LCS4.IOM
Advertisement
Table of Contents
