Table of Contents
Advertisement
LCS-4 L-Band Combiner Switch
Low Noise Block Assembly
6. Position the customer-furnished TRF filter and a gasket on Port 4 of the switch.
7. Install the optional support bracket (FP/BR0085). Secure with eight bolts, flat washers, and split
washers.
8.
Set assembly aside for later installation.
Port 3
LNA-A
Port 2
IMPORTANT
Figure 4-3. C-Band LNB Switch
Ensure that the OUTPUT flange of the filter is against the switch.
4–5
Revision 1
MN/LCS4.IOM
Port 4
Port 1
LNA-B
Advertisement
Table of Contents
