C-Band Lnb Installation - Comtech EF Data LCS-4 Installation And Operation Manual

LCS-4 L-Band Combiner Switch
Low Noise Block Assembly
4.3.4 C-B LNB I
AND
1. Remove the protective cover from the antenna OMT and LNB.
2. Install the appropriate gasket on the antenna end of the LNB, as follows:
a. If only one of the mounting surfaces has a groove, use the half-thick gasket.
b. If both mounting surfaces have grooves, use the full thick gasket.
3.
Position the LNB (with gasket) in place on the antenna and fasten using the supplied
hardware.
NSTALLATION
4–6
Revision 1
MN/LCS4.IOM