General Setup; Setting The Mode Timer (Fax-2820 And Fax-2920 Only); Setting The Mode Timer (Mfc-7225N Only) - Brother FAX-2920 User Manual

Chapter 2

General Setup

Setting the Mode Timer
(FAX-2820 and FAX-2920
only)
The machine has two temporary mode keys
on the control panel: Fax and Copy. You can
change the number of seconds or minutes
the machine takes after the last Copy
operation before it returns to Fax mode. If you
select Off , the machine stays in the mode
you used last.
1
Press Menu/Set, 1, 1.
1.Mode Timer
2
Press ▲ or ▼ to select 0 Sec ,
30 Secs , 1 Min , 2 Mins , 5 Mins or
Off .
Press Menu/Set.
3
Press Stop/Exit.
2 - 4
Setting the Mode Timer
(MFC-7225N only)
The machine has three temporary mode keys
on the control panel: Fax, Scan and Copy.
You can change the number of seconds or
minutes the machine takes after the last Scan
or Copy operation before it returns to Fax
mode. If you select Off , the machine stays in
the mode you used last.
1
Press Menu/Set, 1, 1.
1.Mode Timer
2
Press ▲ or ▼ to select 0 Sec ,
30 Secs , 1 Min , 2 Mins , 5 Mins or
Off .
Press Menu/Set.
3
Press Stop/Exit.