Retrieving Fax Messages; Changing Your Fax Forwarding Number - Brother FAX-2920 User Manual

Chapter 6

Retrieving fax messages

You can call your machine from any touch
tone phone and have your fax messages sent
to a fax machine.
1
Dial your fax number.
2
When your machine answers,
immediately enter your Remote Access
Code (3 digits followed by
hear one long beep, you have
messages.
3
As soon as you hear two short beeps,
use the dial pad to press 9 6 2.
4
Wait for the long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent to followed by
## (up to 20 digits).
Note
You cannot use and # as dial numbers.
However, press # if you want to store a
pause.
5
Press 9 0 to reset the machine when
you've finished.
6
Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
6 - 6
Changing your Fax
Forwarding number
You can change the default setting of your fax
forwarding number from another telephone or
fax machine using touch tone.
1
Dial your fax number.
2
When your machine answers,
). If you
immediately enter your Remote Access
Code (3 digits followed by
hear one long beep, you have
messages.
3
When you hear two short beeps, use the
dial pad to press 9 5 4.
4
Wait for the long beep, and then use the
dial pad to enter the new number of the
remote fax machine where you want
your fax messages forwarded followed
by ## (up to 20 digits).
Note
You cannot use
However, press # if you want to store a
pause.
5
Press 9 0 to reset the machine when
you've finished.
6
Hang up after you hear your machine
beep.
). If you
and # as dial numbers.