Fax Redial; How To Fax; Automatic Transmission; Faxing From The Adf - Brother FAX-2920 User Manual

Fax Redial

If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Start to try again. If you want to make a
second call to the last number dialled, you
can save time by pressing Redial/Pause and
Start.
Redial/Pause only works if you dialled from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.

How to Fax

Automatic transmission

This is the easiest way to send a fax.
Press Start immediately after dialling. (For an
example of automatic faxing, follow the steps
in Faxing from the ADF on this page.)

Faxing from the ADF

1
If it is not illuminated in green, press
(Fax).
2
Put the document face down in the ADF.
3
Dial the fax number.
Press Start. The machine starts
scanning the document.
Manual transmission (with an
external telephone only)
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Pick up the handset of the external
phone and listen for a dial tone.
4
On the external phone, dial the fax
number you want to call.
5
When you hear the fax tone, press
Start.
6
Replace the handset of the external
phone.
Setup Send
3
3 - 3